If you're considering upgrading to the Aimpoint Acro P2 battery cap for your Aimpoint ACRO P2 red dot sight, you might be wondering how to install it. In this step-by-step installation guide, we'll walk you through the process to ensure a smooth and successful installation.
Tools and Materials Needed:
Before you begin, gather the following tools and materials:
FCD RBC ACRO P2: The replacement battery cap.
Red T10 Bit: This tool is typically provided with your Aimpoint ACRO P1/P2 & Duty RDS.
Battery Cap Tool: Also included with your Aimpoint ACRO P1/P2 & Duty RDS.
Installation Steps:
Ensure Safety: Before handling any firearm accessories, always ensure that your firearm is unloaded, and the chamber is clear. Safety should be the top priority.
Prepare a Clean Workspace: Find a well-lit and clean workspace to perform the installation. Lay down a soft cloth or pad to prevent scratching your Aimpoint ACRO P2 or the FCD RBC ACRO P2 during the process.
Remove the Old Battery Cap: Using the Red T10 Bit, carefully remove the old battery cap from your Aimpoint ACRO P2. Turn it counterclockwise until it is completely detached.
Inspect the Threads: Take a moment to inspect the threads on the Aimpoint ACRO P2 to ensure they are clean and free from debris. If necessary, use a soft brush or cloth to clean them.
Prepare the FCD RBC ACRO P2: Examine the FCD RBC ACRO P2 to ensure it is in good condition and clean. Check for any defects or imperfections.
Align and Attach: Align the FCD RBC ACRO P2 with the threads on your Aimpoint ACRO P2. Begin threading it on by hand, turning it clockwise. Ensure that it goes on smoothly and evenly.
Tighten Gently: Once the FCD RBC ACRO P2 is threaded onto the Aimpoint ACRO P2, use the Battery Cap Tool to gently tighten it. Do not over-tighten; simply ensure it is snug.
Check Battery Compartment: Open the battery compartment of the FCD RBC ACRO P2 and insert the required battery (usually a CR1225 or similar). Ensure it is properly seated and the cap closes securely.
Function Test: Perform a function test by turning on your Aimpoint ACRO P2 to ensure it powers up correctly and functions as expected.
Final Inspection: Inspect the FCD RBC ACRO P2 for any misalignment, loose fit, or issues. Ensure that it is securely in place.
Congratulations, you have successfully installed the FCD RBC ACRO P2 on your Aimpoint ACRO P2 red dot sight! Your sight should now have enhanced durability, battery access, and control, thanks to this high-quality replacement battery cap. Enjoy your improved shooting experience!
